Windows 8

I got a bit bored of posting only about Samsung Galaxy Y S5360 so i thought of posting 'How to get Activated License of Windows 8 for free'.

To do this you will need ;

• DVD-R Disk - Buy it at your closest store.
• BitTorrent(For downloading needed programs/files) - Download
• Nero Burning Rom - Download
• Windows 8 Pro - 32Bit Version or 64Bit Version
• Windows 8 Activation Tools - Download

1. After everything is downloaded(Use BitTorrent to download Windows 8 ISO file),follow next steps.
2. Insert your DVD disc to your writable DVD-ROM,Open Nero Burning ROM.
3. In Nero Burning ROM,select ' DVD .ISO ' select .ISO file you downloaded and burn it to your empty disc.
4. When it's done,restart your PC while you have your Windows DVD still in.
5. Windows Installation will appear,if it doesn't restart your PC again (CTRL+ALT+END) and open Boot menu.
6. When you get to Product Key Page,enter this key : XKY4K-2NRWR-8F6P2-448RF-CRYQH and click next.
7. Windows will start installing and it will probably take about 10 minutes.
8. When Windows finishes configuring and Metro appears,open Internet Explorer and download Windows 8 Activation Tools.
9. Open Activator,press ' Windows 8 Install/Uninstall ' , in console type ' Y ' and wait  for 2 minutes.It will automatically restart.
10. Windows will be fully activated.
11. If windows watermark appears,use watermark removal that is also stored in the Activation Tools archive.

Getting back to your Stock ROM using ODIN for Samsung Galaxy Y

Specially for Amadi Williams...

If your phone is stuck at the Samsung LOGO, its probably due to the removal of battery while the Samsung logo is still there which feels like its stuck. Here are your steps...

1) Make sure you have Samsung Kies installed on your P.C/Laptop.

2) In your device, go to Settings>Applications>Development>... and enable USB Debugging

3) Download the ODIN files including ODIN from here .

4) Make sure your Antivirus is switched off and so is Kies.

5) Now after downloading of ODIN is finished, run the ODIN program in your PC.

6) Switch off your phone.

7) Boot into Downloading Mode. For that, press Volume Down button+Home Button+Power Button.

8) A Warning message will appear. Press Volume Up to continue the process.

9) Now your mobile is in the Downloading mode.

10) Connect your mobile to the PC only via USB.

11) A yellow light will flash up in your PC below 'ID:COM'. This makes sure that your mobile is properly connected.

12) The files rather than ODIN save them anywhere in your PC.

13) Now, in the South-Eastern part of the ODIN, you will see a box named 'PIT'. Click it. You'll be asked to Browse the pit file. From the other files which you saved anywhere, select the file named 'totoro_0623.pit.

14) Now select BOOTLOADER, select the file named 'BOOT_S5360DDKK1_REV05'.

15) For PDA, select the file named 'PDA_S5360DDKK1_REV05'.

16) For MODEM, select the file named 'MODEM_S5360DDKK1_REV05'.

17) For CSC, select the file named 'GT-S5360-MULTI-CSC-ODDKJ3'.

18) Make sure the tick-boxes Re-Partition, Auto-Reboot & F. Reset. Time are all checked.

19) Check all the details again, and then click 'Start'.

20) As soon as you start, above ID:COM you will see something like 'boot' or'system' blablabla...

21) And also on the device, you will see the increasing blue line indicating the %completion of the process.

22) Wait for the process to complete.

23) The device will automatically reboot. No need to do anything.

24) In ODIN, it will be written PASS if you followed the steps correctly.

25) It will take 2-3 minutes for the rebooting.

26) And ta-da... your phone is unbricked!!! I hope it will help you Amadi Williams...

Don't worry, everything's will be fine.